Concrete is a durable and commonly used material in many aspects of home construction, from foundations and driveways to patios and walkways. However, over time, you may notice that certain concrete surfaces start to sink or settle, resulting in uneven or sunken areas. This can not only be unsightly but also pose potential safety hazards. Understanding why concrete sinks and the available solutions for fixing it is essential for maintaining a safe and functional home.

Soil Erosion: One common reason for concrete sinking is soil erosion. As the soil beneath the concrete shifts or erodes due to factors like poor compaction, water drainage issues, or natural settlement, it creates voids or empty spaces beneath the concrete. With nothing to support it, the concrete eventually sinks into these voids.
Plumbing Leaks: Plumbing leaks can lead to water seepage beneath the concrete, causing soil erosion and weakening the ground supporting the concrete. This can result in sinking or settling of the affected areas.
Poor Compaction: Insufficient compaction of the soil during the initial construction phase can lead to future sinking or settling of the concrete. If the soil beneath the concrete was not properly compacted, it may compress over time, causing the concrete to sink.
Extreme Weather Conditions: Freezing and thawing cycles in Calgary, as well as heavy rainfall, can impact the soil’s stability beneath concrete surfaces. The expansion and contraction of the soil due to these weather conditions can create voids or soften the ground, leading to sinking or settling of the concrete.

To address the problem you would typically hire a company for concrete lifting.

Concrete lifting, commonly known as slab jacking or mud jacking, is a very popular, cost-effective method of lifting and leveling concrete, including driveways, patios, sidewalks, garage floors, basements, and more. Slab jacking involves pumping our custom cement mixture beneath the slabs to fill the voids and raise sunken concrete back to its original height and alignment. Holes are drilled in the concrete slabs to reach all voids and the mixture is pumped into the holes until the concrete slabs are lifted back to their original position.

Our mission at All Time Concrete Lifting, located in Calgary, Alberta, Canada, is to provide high-quality concrete lifting services for affordable prices. We’ve done that through our hard work, dedication and service, establishing us as Calgary’s first choice for concrete lifting and void filling.

With over 15 years in the concrete business, a proven track record of success and a passion for helping homeowners, you know you’re hiring the best when you work with us.

Our local family-owned business is looking forward to serving you when you need it the most so give All Time Concrete Lifting a call at (403) 560-8626 and we’ll be happy to discuss all options with you.

Lifting sunken concrete from a driveway typically involves a process called slabjacking or concrete leveling. Here are the general steps involved in this process:

Assessment: We will first assess the extent of the sunken concrete and identify the underlying cause, such as soil erosion, improper compaction, or water damage. This evaluation helps determine the best approach for lifting the concrete.
Preparation: We’ll prepare the area by cleaning the surface of the concrete and removing any debris or loose materials. This step ensures a clean and stable working environment.
Drilling: Small holes are drilled into the sunken concrete slab. The number and location of the holes depend on the size and condition of the slab. These holes act as access points for the lifting material.
Injection: All Time Concrete Lifting uses grout injection using grout that’s mixed on site. We mix our material to the mix we need it to flow correctly beneath the slab, which depends on space beneath the concrete slab. This method is better than foam because foam piles up while our material flows beneath the slab before it raises concrete.
Lifting: As the injection material expands, it exerts pressure on the sunken concrete, gradually raising it to its original level. The contractor carefully monitors the process to achieve an even and precise lift.
Patching and Finishing: Once the concrete slab is lifted, the drilled holes are patched with a suitable material to restore the appearance and integrity of the driveway. Any cracks or surface imperfections may also be repaired or filled during this stage.

It’s worth noting that the specific techniques and materials used for lifting sunken concrete can vary depending on the situation and the expertise of the contractor. Therefore, All Time Concrete Lifting will assess your specific needs and determine the most appropriate method for your driveway.

Raise your concrete back to its proper level and stabilize it for years to come with All Time Concrete Lifting. We offer homeowners high-quality and affordable concrete lifting in Calgary for sidewalks, driveways, garages, patios and more, guaranteeing the best results and saving you thousands in expenses. Get your free estimate from us today. Call (403) 560-8626

Both grout injection and foam lifting are methods for lifting sunken concrete slabs. However, the choice between the two methods depends on the specific situation and the preferences of the homeowner and contractor.

Grout injection involves injecting a mixture of cement, water, and other materials beneath the sunken slab to raise it back to its original position. This method has been used for decades and is a proven technique for repairing concrete slabs. Some advantages of grout injection over foam lifting include:

Cost: Grout injection is often less expensive than foam lifting, as it requires fewer materials and is a simpler process.

Durability: Grout injection is known for creating a strong and durable base beneath the slab. The grout mixture hardens and sets into place, providing a long-lasting solution to the sinking problem.

Precision: Grout injection allows for precise control over the lifting process, which can be important for ensuring the slab is raised to the correct height and stays level.

All Time Concrete Lifting uses grout that’s mixed on site. We mix our material to the mix we need it to flow correctly beneath the slab, which depends on space beneath the concrete slab. This method is better than foam because foam piles up while our material flows beneath the slab before it raises concrete.

As a homeowner, there are many things you need to keep in mind to maintain the structural integrity of your home. One issue that can arise over time is the sinking or settling of your concrete slabs, which can create a variety of problems. Fortunately, All Time Concrete Lifting is your solution to this problem. We can help restore your home’s stability and prevent further damage. To help you understand this process, here are some key terms related to concrete lifting and why they are important to know:

Concrete Lifting: Also known as slabjacking or mudjacking, concrete lifting is the process of raising sunken concrete slabs back to their original position by pumping a mixture of grout and other materials underneath the slab.
Polyurethane Foam: This is a common material used in concrete lifting that is injected into the ground beneath the slab to lift it back into position. Polyurethane foam is a lightweight and durable material that can help support the weight of the slab and prevent future sinking.
Foundation Settlement: This is the process by which a foundation sinks or settles over time due to soil movement, water damage, or other factors. Foundation settlement can lead to a variety of problems, including cracks in walls, uneven floors, and other structural issues.
Concrete Cracking: As concrete settles over time, it can develop cracks due to the weight of the slab and the natural expansion and contraction of the material. These cracks can worsen over time and lead to more serious structural issues.
Slab Piers: Slab piers are a type of support system that can be installed beneath concrete slabs to help prevent sinking and cracking. These piers are installed deep into the ground and can help stabilize the foundation of your home.

Understanding these terms is important because it can help you identify potential issues with your concrete slabs and take action to prevent further damage. If you notice cracks in your concrete or uneven floors, it may be a sign that your foundation is settling and in need of repair. By working with a professional concrete lifting company, you can take steps to restore the stability of your home and prevent further damage from occurring. With the right knowledge and support, you can ensure that your home remains safe, stable, and structurally sound for years to come.

With over 15 years in the concrete business, a proven track record of success and a passion for helping homeowners, you know you’re hiring the best when you work with us.

Grout injection is the method of filling the cracks, open joints, voids, or honeycombs, in concrete or masonry structural members. This is done under pressure with a grout material that cures in place to produce the desired results like strengthening a structure and preventing water from getting in. Watch this brief example below of how it works.

With over 15 years in the concrete business, a proven track record of success and a passion for helping homeowners, you know you’re hiring the best when you work with us.

Slab jacking, also known as mudjacking or concrete leveling, is a technique used to raise and level sunken concrete slabs. This process is commonly used to repair and restore concrete surfaces that have become uneven due to soil settling, erosion, or poor compaction. Slab jacking can help homeowners avoid the costly and time-consuming process of tearing out and replacing the entire concrete slab.

The slab jacking process involves drilling small holes in the sunken slab and pumping a mixture of sand, cement, and other additives through the holes to lift the slab back into its original position. This process can be done in a matter of hours and can be completed with minimal disruption to the surrounding landscape and property.

There are several reasons why a homeowner might need slab jacking. One common reason is settling or sinking concrete slabs, which can cause a variety of problems. Uneven concrete can create trip hazards, damage vehicles, and cause water to pool in unwanted areas. Over time, the structural integrity of a home’s foundation can also be compromised if the concrete slabs supporting the foundation begin to sink or shift.

Another reason why a homeowner might need slab jacking is to repair concrete surfaces that have become damaged or deteriorated. For example, cracked or damaged concrete patios, driveways, or walkways can be repaired through the slab jacking process. By raising and leveling the affected area, homeowners can avoid costly replacement and enjoy a restored, safe, and level surface.

In addition to its practical benefits, slab jacking is also a cost-effective and environmentally friendly solution. Rather than tearing out and replacing concrete slabs, slab jacking allows homeowners to reuse and repair their existing surfaces, reducing waste and conserving resources.

In conclusion, slab jacking is a valuable technique for homeowners who are dealing with uneven or damaged concrete surfaces. By using this process, homeowners can save time and money while avoiding the disruption and waste associated with traditional concrete replacement methods. If you are experiencing issues with sunken or damaged concrete surfaces, consider contacting a slab jacking professional to discuss your options and determine whether slab jacking is the right solution for your needs.

Sinking or sunken concrete slabs don’t have to derail your home’s appearance or value. At All Time Concrete Lifting, we offer fast and effective slab jacking, lifting your concrete and restoring it to its original height. Our expertise and knowledge in delivering the best results, coupled with affordable prices, make us the best team for slab jacking in Calgary.

Living in a climate like Calgary, Alberta can have a significant impact on your home’s concrete. Calgary’s climate is characterized by cold winters, with temperatures regularly dropping below freezing, and hot summers, with temperatures occasionally reaching over 30°C (86°F). These extreme temperature fluctuations can cause the concrete to expand and contract, leading to cracking and damage over time.

In addition to temperature changes, Calgary’s climate also experiences freeze-thaw cycles. During the winter, water can seep into small cracks and pores in the concrete. When the temperature drops below freezing, the water expands and causes the cracks to widen. When the temperature rises above freezing, the water melts and seeps deeper into the concrete, where it refreezes during the next cycle. This continuous cycle of freezing and thawing can cause significant damage to the concrete over time.

Furthermore, Calgary’s climate also experiences frequent snow and ice, which can lead to the use of de-icing agents such as salt and other chemicals on the roads and sidewalks. These chemicals can be tracked onto your driveway and walkways and can cause damage to the concrete by increasing the rate of corrosion of the reinforcing steel within the concrete.

To mitigate the impact of Calgary’s climate on your home’s concrete, it is essential to ensure proper installation and maintenance of your concrete surfaces. This includes ensuring proper drainage, sealing cracks and joints, and using proper concrete mix designs to ensure durability and resistance to temperature and moisture fluctuations. Regular maintenance, such as cleaning and sealing, can also help protect your concrete from damage and extend its lifespan.

The mission at All Time Concrete Lifting, located in Calgary, Alberta, Canada, is to provide high-quality concrete lifting services for affordable prices.

We’ve done that through our hard work, dedication and service, establishing us as Calgary’s first choice for concrete lifting and void filling.

With over 15 years in the concrete business, a proven track record of success and a passion for helping homeowners, you know you’re hiring the best when you work with us.

Concrete lifting, slab jacking, and mud jacking are three different methods used to raise and level sunken concrete slabs. While they all achieve the same end goal, there are some differences in the techniques used to accomplish it.

Concrete lifting:
Concrete lifting is a process of lifting sunken concrete slabs by drilling holes into the surface and injecting a polyurethane foam mixture underneath. The foam expands, filling the voids and lifting the slab back to its original position. This technique is also known as polyjacking or foam jacking.
Slab jacking:
Slab jacking, also known as mud jacking or pressure grouting, is a process of lifting sunken concrete slabs by pumping a mixture of sand, cement, and water (or mud) underneath the slab. As the mixture fills the voids beneath the slab, it lifts it back to its original position.
Mud jacking:
Mud jacking is similar to slab jacking, but it involves pumping a mixture of water, soil, and cement (or mud) under the sunken slab. This mixture is heavier than the sand-cement mixture used in slab jacking, which makes it a more suitable option for lifting larger slabs.

Some key differences between these methods include the materials used, the weight of the lifting material, the injection process, and the cost. Concrete lifting using polyurethane foam tends to be the most expensive option, but it also provides the most accurate and long-lasting results. Slab jacking with sand-cement mixture is a more affordable option, but it may not be as precise and the results may not last as long. Mud jacking is typically the most affordable option, but it is not suitable for all types of concrete slabs and may require more maintenance over time.

Ultimately, the choice of which method to use will depend on the specific needs of your project so give All Time Concrete Lifting, located in Calgary, Alberta, Canada, a call at (403) 560-8626 and we’ll be happy to discuss all options with you.

The mission at All Time Concrete Lifting, located in Calgary, Alberta, Canada, is to provide high-quality concrete lifting services for affordable prices.

We’ve done that through our hard work, dedication and service, establishing us as Calgary’s first choice for concrete lifting and void filling.

With over 15 years in the concrete business, a proven track record of success and a passion for helping homeowners, you know you’re hiring the best when you work with us.

Our local family-owned business is looking forward to serving you when you need it the most.

Mud jacking is a process of lifting and stabilizing sunken concrete slabs by injecting a mixture of water, soil, and cement (known as “slurry”) underneath them. The slurry fills any voids or gaps in the soil and raises the concrete back to its original level.

You may need mud jacking if you have sunken or settled concrete surfaces, such as:

Driveways, sidewalks, or walkways that have become uneven or cracked due to soil erosion or settling.
Foundations or basement floors that have sunk due to soil compaction or shifting.
Patios, pool decks, or garage floors that have developed depressions or cracks due to heavy use or soil movement.

Mud jacking is a cost-effective and eco-friendly alternative to concrete replacement. It is also a quick process, with most jobs completed within a few hours. Additionally, it is a long-lasting solution that can help prevent further damage and increase the lifespan of your concrete surfaces.

If you have sunken concrete surfaces, it’s important to address the issue as soon as possible to prevent safety hazards and further damage. All Time Concrete Lifting Services, located in Calgary, can help you restore your concrete surfaces and enhance the value and safety of your property. Give us a call at (403) 560-8626 for a free estimate.

All Time Concrete Lifting is a reputable and reliable concrete lifting company based in Calgary, Alberta and there are several reasons why it’s a great choice for your concrete lifting project:

Experience and expertise: All Time Concrete Lifting has years of experience in the concrete lifting industry, and its team of professionals has the expertise and knowledge to provide high-quality and long-lasting concrete lifting solutions.
Innovative techniques: The company uses innovative and modern techniques to lift and level concrete surfaces. These techniques are faster, more efficient, and less invasive than traditional concrete lifting methods, which means less disruption to your property and daily routine.
Competitive pricing: All Time Concrete Lifting offers competitive pricing for its services, and its team works with clients to find the best solutions that fit their budget and needs.
Professionalism and customer service: All Time Concrete Lifting is known for its professionalism and excellent customer service. The team is prompt, courteous, and respectful of your property and your time, and they strive to ensure that clients are satisfied with the work they perform.
Long-term solutions: All Time Concrete Lifting doesn’t just provide quick fixes to concrete problems; the company provides long-term solutions that are designed to prevent future damage and ensure the longevity of your concrete surfaces. This means that you can rely on All Time Concrete Lifting to provide a lasting lift that you can trust.

Overall, All Time Concrete Lifting is a great choice for concrete lifting in Calgary. With years of experience, innovative techniques, competitive pricing, and a commitment to professionalism and customer service, All Time Concrete Lifting is a reliable and trustworthy partner for all your concrete lifting, slab jacking and mud jacking needs.